SD-2801A cone penetration tester is designed and manufactured according to the technical requirements and relevant regulations of the People's Republic of China standard GB/T269 "Grease and petroleum grease cone penetration determination method". It is mainly suitable for testing the cone penetration of grease.
The instrument can also be used for solid fine grain, powder, colloid, frozen materials, as well as cheese, sugar gum, butter, cream, fermented materials and other food raw materials inspection, in food industry, traffic and highway engineering and other industrial departments can be widely used.
| Compliant with standards: | GB/T 269 |
| Test sample | Petroleum and chemical products |
| detection result | Mainly suitable for testing the cone penetration of lubricating grease |
| Product model | SD2801A |
ASTMD217Standard Lubricating Grease Cone Penetration Tester SD2801A
Cone Penetrometer ASTMD217Lubricating Grease Cone Penetration Tester
ASTMD217Lubricating Grease Cone Penetration Tester
Lab GB/T269Lubricating Grease Cone Penetration Testing Equipment
Standard Penetration Test ASTMD217Dynamic Grease Cone Penetrometer
Standard Test Methods for Cone Penetration of Lubricating
Lubricating Grease Cone Penetration Tester ASTM D217
I. Main technical features
1, the use of digital display to display the taper value, intuitive and eye-grabbing.
2. Digital display of cone entry time control device.
3, With lifting frame coarse adjustment, fine adjustment function, easy adjustment, accurate needle.
II. Main technical parameters and indicators
| measuring range | 0 ~ 700 cone degree |
| the time error | less than ±0.1 seconds; |
| coning accuracy | ±1 coning degree |
| standard | national standard GB/T269 |
| Instrument size: 340*282*515 weight: 11kg |
| Timing controller | Time can be set according to their own needs, the time error is less than ±0.1 seconds; |
| Resolution | 0.01mm |
| Temperature control accuracy | 25±0.1ºC (Note:The ambient temperature shall not exceed 20 ºC) |
| Temperature control mode | High accuracy digital temperature controller |
| Working power supply | 80W |
| Standard needle | 2.5±0.05g |
| Stirring | automatically stirred by a magnetic stirrer |
| Standard cone | 102.5±0.05g |
| Needle holder | It can be adjusted roughly and finely. Convenient toad just and exact to aim the sample |
| Others | Equipped with a cold light source and a magnifier; Convenient for operation and observation |
Packing list:
| S/N | Name | Unit | Quantity | Remarks |
| 1 | Instrument host | set | 1 | |
| 2 | Standard cone | piece | 1 | |
| 3 | Connecting rod | piece | 1 | |
| 4 | Sample holder | piece | 1 | |
| 5 | Fuse 5A(∮5×20) | piece | 1 | |
| 6 | Power cord(250V 6A) | piece | 1 | |
| 7 | instructions | copy | 1 | |
| 8 | Certificate warranty card | copy | 1 | |
Note: According to GB/T269, the general situation of cone penetration testing is as follows:
1. For ordinary cone penetration testing, SD2801A cone penetration tester is generally used for ordinary testing, and the tested value is the non working cone penetration value.
2. Constant temperature cone penetration testing: It is required to have a high degree of accuracy and strictly follow the standard testing. SD2801C constant temperature cone penetration tester is required for testing. This model is equipped with a temperature and constant temperature device, which can raise the temperature to 25 degrees in winter and lower the temperature to 25 degrees in summer. Perform cone penetration testing after uniform temperature control, and the measured value is the non working cone penetration value.
3.60 working cone penetration and extended working cone penetration tests: Generally, SD2801A is required to be used in conjunction with SH269 100000 shear testing machine. If there is a high temperature requirement and the experiment is carried out at a constant temperature of 25 degrees, SD2801C can be used in conjunction with SH269 100000 shear testing machine. The measured values are 60 working cone penetration values and extended working cone penetration values.
The above are the most commonly used scenarios for detecting cone penetration, which can be selected according to the situation.
Packaging & Delivery
1. Out packing: Standard export wooden case.
2. Inner packing: With careful stretch film wrap product, hard wood board+ strong bandage to fix corners.
3. Checking teams: Specialized staff to inspect and classified your goods.
4.Port Any port of China
Lead Time :
| Quantity(Sets) | 1 - 1 | 2 - 5 | 6 - 10 | >10 |
| Est. Time(days) | 6 | 20 | 30 | To be negotiated |
Contact us
Shandong Shengtai Instrument Co.,ltd
ADD:6-8 time base NO.15 lanxiang road tianqiao Area Jinan city
TEL:+86 0531-85919987 85929987
FAX:+86 0531-85957987
Whatsapp/facebook:+86 13370527859
QQ:3206156217
Email:3206156217@qq.com
Web:www.labtool.net/en
Product Tags:
|
|
Testing Cone Penetration Of Lubricating Grease SD-2801A Equipped With Cold Light Source For Easy Operation Images
|
